KATUR 10pcs BAU15S 7507 1156PY PY21W 5630 33-SMD White 900 Lumens 8000K Super Bright LED Turn Tail Brake Stop Signal Light Lamp Bulb 12V 3.6W

Brighter than original bulb BUT when you hit the brakes, they fail to become THAT much brighter, thus making it less obvious that you are braking. The build quality is GREAT, but I was just disappointed with the results for these. I was surprised these didn't get that much brighter when you hit the brake light...had to have a 2nd set of eyes to ensure and confirm what I saw

I was skeptical to buy these bulbs initially because of the low price compared to auto parts stores. i installed these bulbs into my 67 mustang and 1992 jeep wrangler; they not only fit perfectly but work great and are much brighter than the original bulbs! the conical feature at the tip is really awesome and makes the bulbs very bright for my brake light applications. all the bulbs worked right out of the box and after several weeks i have had no issue what so ever. a very cheap and fantastic upgrade not only for longevity due to them being LED but as they are brighter than the original incandescent bulbs.

I ordered BAU15S / 1156PY bulbs. I received a package that said BAU15S / 1156PY on it. Inside that package was 4 1156 base bulbs. F.Y.I. to KaTur: 1156 bulbs have 2 nubs at the base that are 180 degrees apart from each other, BAU15S / 1156PY bulbs also have 2 nubs on the base but they are 120 / 240 degrees apart. As a bulb manufacturer you should probably know this stuff. Otherwise the bulbs looked like they were constructed halfway decently.

Arrived in a timely manner, works as expected and are actually brighter than I thought they'd be for brake brake and tail lights. Very happy, girlfriends sister has had them a month now on her daily driver with no issues or complaints.Gave 5 stars cause others want feedback and some ask for it before you even get the product. I've had them a month and have had time to use the. Kinda made it feel like they cared and were following up to make sure I was still a happy customer. I know, I know, it was probably computer generated, but it was nice to get it after some time to use them sufficiently.

I bought these to use in a 3 light hitch receiver cover. That said, when I am towing a trailer, this unit is not even used, so these bulbs have not seen that much use. I bought 4 because my cover has 3 lights in it. The rest of my truck is LED, so I wanted to convert this to LED as well. After 9 months, one of the bulbs started flickering. Upon inspection I noticed, that about half of the LED chips were flickering, while the rest appeared to work normally. I had an extra bulb, so no big deal. Now a few weeks later, the same thing is happening to another of the bulbs! Don't waste your money here....buy some other bulbs.....time for me to shop for better ones now! :-(

I used the 1157 for the tail light in my 2013 KLR650. It works well, the only reason I can't rate it 5 stars is because the difference between the running light and brake light is not as much as I would prefer. Not a huge deal, but it's good to have a really bright tail light on a motorcycle.

There are a few distinct advantages LED bulbs are supposed to have over traditional incandescent bulbs, and one of those advantages is long-life, which these DO NOT have. Sure, they're bright and they're easy to use and all that jazz, but mine failed at least three if not four times faster than any incandescent bulb of this style that I've used in my car. They lasted less than six months. Just complete garbage. There are much better options for LED replacement bulbs for your car; do not buy these or any AUXITO bulbs either. They are all terrible.

Installation tip below...So, I accidentally ordered the BAU15S bulb instead of the normal 1156 bulb. If you've also done this and don't feel like returning them, just file off one of the nubs and it should sit in there just fine. Just don't plan on complaining about them after doing so.As far as the brightness goes, these are brighter than a nice, german made incandescent bulb through an amber lens, but not as bright as a previous pair of amber LED bulbs that I had purchased, which also had 5630 style LEDs in them and identical frame construction. The previous pair had developed a flicker though, and these are steady. I really liked that the previous pair could be seen with direct sunlight on my taillight housing. It was an immediately apparent change in the time it took for a driver 1 lane over to react to my blinker. Hopefully these are still bright enough to do that in the sunlight. I think the last ones were a bit too blinding at night.Here's the big installation tip: SILVER SPRAY PAINT. Incandescent bulbs generate heat that causes the silver paint on most taillight housings to fail, leaving the black plastic below, which doesn't reflect much light. Do yourself a huge favor and take the whole housing out, if possible, clean it really well, tape it off, and spray it with silver/chrome or white spray paint. I did one at a time just to see if there was a difference with the same bulbs and it was a gamechanger.

Received these LED bulbs to replace my vehicle tail/front indicators (filament bulbs)... Not the cheapest of bulbs, but I would expect the action of putting the bulb in & then removing it to change the polarity, would not end up with it disintegrating in my hand with the bayonet end stuck in the holder. I've had to hold off replacing my front indicators until I have a working pair, so that their brightness matches. The ones I managed to fit are brighter than the old filament ones & seem to be holding up ok. But I'm left disappointed having to arrange a replacement. Update..I am returning these bulbs, due to the above reason & it turns out on a lot of vehicles, fitting LED indicator bulbs results in 'hyper-flashing', where the flasher unit thinks there is a blown bulb, so faced with the hassle of fitting resistors to the circuit I thought I'd just cut my losses & go back to filament bulbs. You live & learn.

Do not fit P21 ! these are very badly made and poor quality ; the pins are not in alignment and so do NOT fit a P21 holder.One was also damaged on arrival, (fallen apart in the packaging) so this shows how poor the manufacturing (lack of) quality is.second replacement order the same. these are absolute RUBBISH!Sent back for an Amazon full refund.AVOID.

Used these to replace the rear indicators in my 2019 Skoda superb, no idea why the other two lights are led but the back ones aren’t, but hey, no matter.The light output is great, very bright. No errors on the cars screen and no hyper flash.The output is as bright if not brighter in the enclosure than the old incandescent bulbs.

Partially my own mistake not checking the type of fitment and believing the pictures to be accurate, but the pictures show a BA15S fitment bulb, which I needed. However the description is for a BAU15S bulb, which is no good for my car. They are also not very bright at all, hardly much better than a standard filament bulb

My 2019 Hyundai Tucson completely reject these bulbs. It set warnings off in the car and i had to put the stock bulbs back in. These are not canbus. Other bulbs that have been replaced in my car said they were canbus, and they have worked. These do not.Do not buy them.

I had to wait a while for these but it was worth it. These LEDs really are very bright and this should make it easier for older less mentally sharp or plain daft drivers on the road to see my intended path. They do flash quicker but you soon get use to this rapidity. Great buy!

Nice and bright. Work with hazard lights. But when just indicators are switch on the lights flash quicker as if I’ve got a bulb out. Shame as they looked good. So don’t get if you’ve got a corsa.

Great product. Needed some help with my car, customer service was excellent especially Ailee. I highly recommend this supplier.

The bulbs themselves look cool, not much difference once they're in though. They're certainly brighter, but all my indicators are behind a sort of frosted plastic so that's probably why. No error code thrown at all and all 4 bulbs are fitted. 66 plate ibiza cupra .

These are good quality LED's equiped with diodes so that they are compatible with Canbus systems. They are very bright with a crisp white illumination.

nice bulbs but VW dont like it and keeps error messages on the dash board , tried it in Nissan Juke no error but flickers 5x faster then it should seneded back for refund

Not very good, fit perfectly but they flash as if you have a bulb out on the car very fast don’t work as it should

Tried in my W204 Merc and error codes come up. its so annoying I had to change it to regular bulbs. The light is definitely brighter than normal incandescent bulbs for sure. The build quality is a bit on the poor side and it broke when trying to fit .

Note these are shown as fitting a P21W but they are PY21W fittings so beware. Other than that looks like a good construction.

Very good does the job they are supposed to.