Fromann 2 Button Round Hand Control Handset Within 90 Degree 5 pin Plug Fixed Power Recliner or Lift Chair

Quick ship and product worked perfectly! Recliner with broken switch. It would recliner but wouldn't return back to normal position. So easy to install this and used some zip ties to secure it and for now am just leaving it on the floor next to the chair. Works great. So happy to find an easy.

Great Item!! I highly recommend this product! Very prompt delivery. Excellent Seller!

This is a great product, many recliners are discarded simply because people think the motor is damaged, most of the times is the switch that is gone and this is a cost effective solution, great value.

chair recliner not working, tried new switch and POOF! WORKS!

Works great just like it says

Our Recliner is less than 6 years old and stopped working all of a sudden. This $12 Fromann 2 Button/Controller Switch kept us from spending lots of money on having someone to come and try to repair our Recliner or even worse spending hundreds of dollars on having to buy a new Recliner all together.Like others have mentioned the overall length of the cord is 1 Foot shorter than the factory cord so you will need to get creative and re-route the cord in order to connect it back into the Motor. The original cord is 78 inches long.To remove the round cover on the side of the Recliner where you operate the Button/Controller, press in on the outer ring slightly and then twist and spin it about a quarter of a turn and it should come off easily. Once you remove this round cover, there are 4 Screws that mounts the Button/Controller to the side of the Recliner. Then it can be pushed out of the mounting hole from the backside. ((When removing the old Button/Controller, pay attention to the orientation of how the buttons are positioned so that the new Button/Controller is installed the correct way or the Recliner will open incorrectly.)) Make sure that the cord has enough "flex room" to operate the Recliner Opened and Closed or you could possibly pinch or stretch the cord and break and snap it in half. I used Velcro rather than Zipties to allow for enough flex room.On the underside of the Recliner, you will need to remove several Staples from the fabric in order to get to where the cord is attached. There are several clips that will need to be removed that hold the cord in place.The new Button/Controller can be installed and ready to go in under 1 hour and will save you hundreds of dollars by replacing it yourself.

Haven't installed it yet, but looks identical to the original.

Right product. OEM product.